OZGENC MAKINA OMRM 113, Operation Manual

Page: 95 / 110

OMRM 113 User Manual
100 | P a g e
1 Shows the current distance of the movable cutting unit
2 Length of profile to be placed in the machine must be entered here
3 Length of profiles to be cut must be entered here
4 Counts the number of profiles to be cut
5 Resets the number of cut profiles
6 Used to set saw cutting speed of cutting unit
7 Used to set cutting angle of fixed cutting unit
8 Used to return to previous menu
9
When "Go to Dimension" is clicked, movable cutting unit moves along the profile
length dimension entered
10 Used to stop cutting
11 Used to start cutting

Enter the profile length to be loaded to the machine in "PROFILE LENGTH" field

Enter the length of profile to be cut in "CUTTING LENGTH" tab.

Set the angle of the fixed cutting unit

Press "GO TO DIMENSION" command to move the machine to entered profile length.

Load profile to the machine and fix the profile by activating profile tightening buttons.

Activate saw motors

Perform profile cutting by pressing cutting buttons