www.oxygenautomation.com
All rights reserved
Pag
.
6
FIXING REAR SUPPORT
PARIS 240 RB – PARIS 240 SB
Fig.1
Fig.2
fig. 2.1
In the case that the size of the pillar or the position of the Hinge (D share) does not allow to contain the
A in desidered measure, you must make a niche on pillar (Fig. 2.1).
Dimension A must always be greater than the proportion E.
TABLE REAR SUPPORT FIXING
(*) Rod effective stroke (**) maximum quota
c = The stroke of the rod is less than the maximum stroke in order to prevent the piston arrives internally in
abutment in the opening and closing phases
