VZR.248100.000 IG
K-14 Swing gate
Installation Guidelines
14
5.2 Connecting control panel
Connect control panel to
Control Board
group of terminals on the cross-
board. The terminals are marked as: 24 V, CL, CH, GND.
The control panel connection should be performed according to terminal
markings given in Table 2.
Table 2
– Marking of terminal for control panel connection
Terminal marking
Wire color
24V
Red
CL
Yellow
CH
Green
GND
Blue
5.3 Connection of access control system (optional)
ACS controller should be connected to a group of terminals
Access Control
System
on the cross-board.
ATTENTION:
THE PRODUCT IS NOT INTENDED FOR PERSONNEL
TIME TRACKING.
Marking of terminals: LEFT, RIGHT, STOP, AP, GND. Terminal
assignment is shown in Table 3.
