The X-MET8000 Series External Connections
The X-MET8000 series has four external connections that are underneath the display. Open the plastic
connectors cover to access them.
1.
USB A connector.
2.
DC supply connector.
3.
Extension connector.
4.
USB Micro-B connector.
1
2
3
4
Use the USB Micro-B connector to connect the X-MET8000 series to a PC with the USB cable. Use the
USB A connector for a USB memory device. Use the DC connector to connect the Power Supply to
charge or power the X-MET8000 series.
Only use the provided Power Supply to charge or power the X-MET8000 series device and batteries.
The use of an incompatible power supply and/or charger might result in damage or personal injury.
Do Not connect generic devices to the extension connector.
The extension connector is designed only for X-MET8000 series accessories like the bench top stand
and is not compatible with any generic consumer devices regardless of similar appearance. Connecting
incompatible devices to the extension port might damage the X-MET8000 series and/or the device(s)
connected to it.
Service Reminder
The X-MET8000 series will show a pop-up notification when the annual instrument maintenance is
due.
The X-MET8000 series device requires proper maintenance to ensure safe and accurate measurement
results. The X-MET8000 series will display a Contact Service message when service or maintenance
is due. Please contact your local Oxford Instruments service point to schedule service for your device.
Failure to properly service the X-MET8000 series can result in personal injury or loss of performance.
7
X-MET8000 Series Operator’s Manual
8
