Do not leave a discharged battery in the device as even if the device is powered off it will consume
a small power and the battery will enter a deep discharge state preventing it from being charged
again.
Check The Battery Charge Level And Remove The Battery
Follow these steps to check the X-MET8000 series battery charge level or remove the battery from
the X-MET8000 series.
1.
The charge level is indicated at the top right corner of the display when the device is powered on.
2.
The charge level can also be checked at the bottom of the battery while the battery is in the device
or stored separately.
To remove the battery from the device, make sure that the X-MET8000 series is switched off or
connected to the Power Supply before removing the battery.
3.
Slide the clip at the base of the handle forward to open the battery cover.
4.
The display at the bottom of the battery indicates the charge level.
One or more of the charge level indicators should be lit.
If no charge level indicators are lit, the battery has no charge.
The battery is fully charged when all charge level indicators are lit.
5.
Decide if it is necessary to charge the battery.
112
X-MET8000 Series Operator’s Manual
8
