exists in both Fixed elements and ”normal” measurements, it is only shown in the Fixed elements list.
If the results are in ”PPM” format, the Fixed elements are also converted and shown in ”PPM”
Delete A Poor Measurement
Occasionally a poor measurement will occur. This can be because the sample is badly positioned, or
because the measurement time is too short. The booklet ‘Safe, Accurate Measurements With The
X-MET8000 Series’ contains guidance for accurate measurements. Follow these steps to delete a
measurement from the Results screen.
1.
Tap Tools when a result is visible.
The Results screen Tools menu appears.
2.
Tap Delete Measurement.
A Warning dialog box appears.
3.
Do one of the following:
•
Tap OK to delete the measurement.
•
Tap Cancel to not delete the measurement.
Print Result From Result Screen To Bluetooth Printer
Before printing the results, it is necessary to configure a Bluetooth Printer and select Connect as
Printer option from the Tools menu in the Bluetooth Settings screen. Please refer to the Supervisor
manual to set this up. Follow these steps to print a measurement from the Results screen to a Bluetooth
Printer.
1.
Tap Tools when a result is visible.
The Results screen Tools menu appears.
21
X-MET8000 Series Operator’s Manual
8
