The X-MET8000 Series Is Damaged
Problem 1
The X-MET8000 series suffered light damage, but continues to operate.
Solution 1
Do not continue to use the X-MET8000 series. It must be fully checked and verified. Contact the local
Oxford Instruments representative for assistance.
Problem 2
The X-MET8000 series suffered significant damage, and cannot operate.
Solution 2
The X-MET8000 series must be fully checked and verified. Contact the local Oxford Instruments
representative for assistance.
Recertification
The X-MET8000 series provides accurate and reliable measurements for many years with minimal
maintenance. Recertification verifies the accuracy of the X-MET8000 series with a series of known,
traceable standard samples. Oxford Instruments recommends annual recertification. Please contact
the local Oxford Instruments representative for additional information.
End Of Life
Use this information when the X-MET8000 series reaches the end of its useful life.
Resale, Loss Or Theft
It may be necessary to register the change of ownership of the X-MET8000 series with a regulatory
organization. Contact the local Oxford Instruments representative for assistance.
Disposal Of The X-MET8000 Series
Contact the local Oxford Instruments representative for assistance.
WEEE: Within the EU, return the X-MET8000 series, batteries, power supplies and battery
chargers to the local Oxford Instruments representative for proper disposal in accordance with
WEEE regulations.
This symbol means that used electrical and electronic products should not be mixed with general
household waste. For proper treatment, recovery and recycling, return to the local Oxford Instruments
representative. The correct disposal of this product will help save valuable resources and prevent any
potential negative effects on human health and the environment, which could otherwise arise from
inappropriate waste handling. Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
117
X-MET8000 Series Operator’s Manual
8
