Oxford Instruments ANDOR Mosaic3 Hardware Manual Download Page 42 | Manualshive

Page: 42 / 62

background image

Mosaic3

42

Version 3.5 rev 8 May 2019

INSTALLATION

4.5 m

osaic

c

abLing

All device interconnection cables will be installed by the Andor Installation Technician and should not be
removed by the user.

The External Trigger and DMD Active Input and Output use SMA connectors. If connecting a new cable carefully align
the cable’s central pin with the coupler on the Mosaic head then gently insert the cable into the coupler. While holding
the cable in place turn the locking collar clockwise until its locked finger tight, do not use a tool to tighten further.
Removal is the reverse of this process.

4.6 m

osaic

o

pticaL

f

ibre

This is a non-user serviceable item and should not be disconnected from the Mosaic head or the Laser Source. If there
is a problem, please contact Andor technical support (see

Section 1.1 Help & Technical Support

).

4.7 s

oftWare

i

nstaLLation

If the device is supplied with Andor’s iQ Software then the Installation Technician will ensure that the software is installed
and operating correctly. For all other software programs please see the applicable User Guide for details. Future
upgrades can be installed by the customer. The latest Andor software releases are available through MyAndor:

http://my.andor.com/login.aspx.

4.8 r

emote

i

nterLock

All laser based Mosaic systems are supplied with a safety interlock kit which will be installed and tested by the Andor
Installation Technician.

If further external interlocks, e.g. doors, need added, the modular nature of the interlock cable assembly allows for
further interlocks to be added. Please contact Andor Customer Support to arrange this.

4.9 s

ystem

c

omponents

and

a

ccessories

Only components and accessories specified and supplied by Andor are suitable for use with the Mosaic. Please contact
your local Andor Representative for assistance with any accessory requirements.

«
...
40
41
42
43
44
...
»

Summary of Contents for ANDOR Mosaic3































































Reviews:

No comments

Related manuals for ANDOR Mosaic3

Brand: ICS Schneider Messtechnik Pages: 124

FX-ARM CONTROLLER

Brand: Magicfx Pages: 16

Brand: GE Pages: 43

Brand: GE Pages: 37

Brand: GE Pages: 210

Brand: GE Pages: 160

Brand: GE Pages: 146

Brand: GE Pages: 6

Brand: GE Pages: 27

Brand: GE Pages: 4

Brand: Ace Pages: 17

Brand: ACE INSTRUMENTS Pages: 33

Brand: ACE INSTRUMENTS Pages: 2

Brand: ACE INSTRUMENTS Pages: 2

Brand: TapFlo Pages: 35

Brand: DANA Pages: 8

Brand: 2E Pages: 6

Brand: Bante Instruments Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands