manualshive.com logo in svg

Oxford Instruments ANDOR Mosaic3, Hardware Manual

Share
Download
Oxford Instruments ANDOR Mosaic3 Hardware Manual Download Page 32

Mosaic3

32

Version 3.5 rev 8 May 2019

PRODUCT OVERVIEW

2.4  system components

2.4.1  usb 405 

nm

 L

aser

 c

ontroLLer

If the Mosaic is supplied with a 405 nm Laser, then this interface allows manual power control of the 405 nm Diode Laser 
or selection of USB control to allow the control software interface to set the laser’s output power level.

2.4.2  L

aser

 h

omogenizer

The Laser Homogenizer randomises the light in the fibre optic to produce a more uniform field of illumination. It is a 
passive device and has no controllable elements.

2.4.3  L

ight

 s

ources

The Mosaic is compatible with a wide variety of light sources including metal-halide lamps, LED sources and lasers. 
Please refer to the User Manuals supplied with each source for further information. Please contact your local Andor 
Sales Representative for any compatibility queries.

2.4.4  i

nput

 s

hutters

The Mosaic may be supplied with one or more fast mechanical shutters on the light source inputs which are used to 
blank the light input for increased extinction ratio. Please refer to the User Manual supplied with the device for operation 
of the Shutter Driver unit.

A shutter will be supplied with any laser based system and acts as a User Controllable Beam Stop. The Shutters self-
close when power is removed so the fastest means of activating the beam stop is to turn the Power Key off on the 

Shutter Driver.

2.4.5  usb 3.0 c

abLe

The Mosaic DMD Head interfaces to the PC via a USB 3.0 cable that is compatible with both USB 2.0 and USB 3.0 
Standard A Receptacle ports. USB 2.0 operates slower than USB 3.0.

2.4.6  usb 3.0 i

nterface

 pci e

xpress

 (pci

e

) c

ard

 (o

ptionaL

)

In case your PC doesn’t have a USB 3.0 port, a PCI Express x1 card is provided for inserting in a compatible PCIe 
desktop PC add-in slot to give you at least 1 off USB 3.0 port.

Summary of Contents for ANDOR Mosaic3































































Reviews:

No comments

Brands by name

Popular brands

Load more brands