3.Junior User Guidebook
7
8.
LAN port
: the network port which can be used to connect with PC.
9.
USB Device port:
It is used to transfer data when external USB equipment connects
to the oscilloscope regarded as "slave device". For example: to use this port when
connect PC to the oscilloscope by USB.
10.
Lock Hole
: You can lock the oscilloscope to a fixed location using the security lock
(please buy it yourself) to secure the oscilloscope.
11.
AV Port
: AV signal output port (optional).
12.
Trig Out(P/F)
port: Trigger signal output or Pass/Fail output, also can be used as the
port of CH2 Output of optional dual-channel waveform generator. The output type can
be set on the menu (Utility menu
→
Output
→
Output).
13.
Out 1
port: Output (single-channel) or CH1 Output (dual-channel)
of optional
waveform generator.
Control Area
8
7
6
1
2
3
11
10
5
4
9
Figure 3-4 Control Area Overview
1.
Function button area
: Total 11 buttons
2.
Waveform generator controls (optional)
or
DAQ:
Multimeter Recorder (see "
P/F:
Pass/Fail (see "
W.REC:
Waveform Record
(see "
How to Record/Playback Waveforms
3.
Trigger control area
with 2 buttons and 1 knob.
The Trigger Level knob is to adjust trigger voltage. Other 2 buttons refer to trigger
system setting.
4.
Horizontal control area
with 1 button and 2 knobs.
"HOR" button refer to horizontal system setting menu, "Horizontal Position" knob
control trigger position, "Horizontal Scale" control time base.
Summary of Contents for Dual-Channel Series
Page 1: ...XDS3000 Dual Channel Series Digital Storage Oscilloscopes User Manual www owon com ...
Page 29: ...3 Junior User Guidebook 22 Double Zoom Single Zoom ...
Page 42: ...4 Advanced User Guidebook 35 Figure 4 2 Rectangle window Figure 4 3 Blackman window ...
Page 43: ...4 Advanced User Guidebook 36 Figure 4 4 Hanning window Figure 4 5 Kaiser window ...
