6.Use the Multimeter (Optional)
112
Multimeter Features
Data Hold Mode
You can freeze the display for any function.
(1)
Select
Hold
in the bottom menu as
ON
.
HOLD
will be shown on the display.
(2)
Select
OFF
to exit this mode.
Making Relative Measurements
When making relative measurements, reading is the difference between a stored reference
value and the input signal.
(1)
Select
Configure
in the bottom menu, select
Relative
in the right menu to enter the
relative mode.
The measurement value at this time is stored as the reference value, and displayed
behind
△
.
In this mode, current reading = input value - reference value.
(2)
Press it again to exit the mode.
Note
: This function is not available when measuring resistance, diodes, and testing for
continuity.
Information Display
Show/hide the information window on the top right of the display.
(1)
Select
Configure
in the bottom menu, select
Show Info
in the right menu as
ON
. The
information window will be shown on the display.
(2)
Select
OFF
to hide.
Auto or Manual Range
Auto range is set as default. To switch auto or manual range, do the following steps:
(1)
Select
Configure
in the bottom menu.
(2)
Select
Auto Range
in the right menu,
AUTO
will be shown on the display.
(3)
Select
Switch Range
in the right menu,
MANUAL
will be shown on the display.
Press this softkey to switch range.
Note
: When testing diode, testing continuity, and measuring capacitance, manual range is
disabled.
Multimeter Recorder
You can use the multimeter data recorder to record the measurements when measuring
current/voltage by multimeter (optional).
Push the
Utility
button, select
Function
in the bottom menu, select
DAQ
in the left menu.
The description of
DAQ
Menu
is shown as the follows:
Summary of Contents for Dual-Channel Series
Page 1: ...XDS3000 Dual Channel Series Digital Storage Oscilloscopes User Manual www owon com ...
Page 29: ...3 Junior User Guidebook 22 Double Zoom Single Zoom ...
Page 42: ...4 Advanced User Guidebook 35 Figure 4 2 Rectangle window Figure 4 3 Blackman window ...
Page 43: ...4 Advanced User Guidebook 36 Figure 4 4 Hanning window Figure 4 5 Kaiser window ...
