LINK PLANNING WORKSHEET
Is Encircled Flux compliant testing required?* YES NO
ENCIRCLED FLUX COMPLIANCE (
MULTIMODE TESTING ONLY
)
*NOTE: if YES, Source Test Cable is automatically
REFERENCE-grade
NAME
(11 characters)
NUMBER
RUN NAME SETTINGS
FIBERS
Used for FULL MODE only
LOSS/CERT MODE ignore this value
METER END
(14 characters)
SOURCE END
(14 characters)
LINK CONFIGURATION INFORMATION
PROJECT
(14 characters)
LOCATION
(14 characters)
REFERENCE METHOD
(LC patch panels use 1-jumper; all others use 2-jumper)
1-JUMPER 2-JUMPER
CONNECTIONS
Do not count patch panels
where testers plug in
SPLICES
Either fusion or
mechanical
splices
Optical Source
WaveSource Pro
AUTO
PORT
MOD
CW
SOURCE TEST CABLE
Reference
Standard
METER TEST CABLE
Reference
Standard
Test Cables automatically count
as connections. Do NOT
include the patch panels
in the number of Connections
STANDARD
EIA/TIA 568C.3
TIA 568.3-D
1G-SX / LX
10G-S
10G-LX4
10G-L/E
40G-S/LR4
100G-S/LR10
FTTH A/B/C
USER DEFINED
FIBER TYPE
62.5um (OM1)
50.0um (OM2/3/4)
Indoor SM
Outdoor SM
TIA Standards also use
CS1 = horizontal cabling
CS2/3 = backbone cabling
LENGTH
CERT MODE (measure with OTDR
to enter manually)
LOSS MODE (not used)
FULL MODE (measured during test)
TEST MODE
LOSS
loss measurement only
CERT
loss measurement w/PASS-FAIL
FULL
CERT + OTDR