Ovislink OV604WVH, User Manual

Page: 71 / 141

User Manual
65
Click Add Firewall , and the following page appears.

name : The name of firewall.

interface : You can select LAN or WAN from the drop-down list.

type : You can select IN or OUT from the drop-down list.

defaultaction : You can select Permit or Drop from the drop-down list.
Click Add Rule , and the following page appears.

enabled : Select the check box to enable the firewall rule.

Protocol : You can select UDP , TCP , or ICMP from the drop-down list.

Action : You can select Permit , Drop , or Reject from the drop-down list.

RejectType : You can select the reject type, when you select Reject as the
action.

IcmpType : You can select the type of ICMP packet, when you select ICMP
as the protocol.

origIPAddress : The original IP address.

origMask : The original subnet mask.

origStartPort : The original start port.

origEndPort : The original end port.