Ovislink OV604WVH User Manual Download

Page: 56 / 141

User Manual

Step4

In this page, it displays the information about the bridge settngs. Click

Apply/Save

to save and apply the settings. You can modify the settings

by clicking the

Back

button if necessary.

5.2.3

3G WAN Service

Choose

Advanced Setup

3G WAN Service

, and the following page appears.

This page is used to configure 3G connection. If you want to access the Internet

through 3G connection, a 3G network card is required. Connect the 3G network card

to the USB interface of the Router.



Information

: Click it to display the information of the 3G network card.



Pin Manage

: Click it to configure the 3G PIN.



Upload Driver

: For a un-support USB dongle, click it to upload the new

driver for supporting the USB. The driver is a text file.

Click

Pin Manage,

and the following page appears.

Summary of Contents for OV604WVH














































































































































Search results

Summary of Contents for OV604WVH

Reviews:

Related manuals for OV604WVH

Brands by name

Popular brands

Ovislink OV604WVH, User Manual

Search results

Summary of Contents for OV604WVH

Reviews:

Related manuals for OV604WVH

Brands by name

Popular brands