2. Installation of the Switch
AirLive POE-FSH8PW User’s Manual
7
2.2 Hardware Overview
Front Panel
The front panel of the web smart switch consists of 10/100Base-TX RJ-45. The LED
Indicators are also located on the front panel.
LED Indicators:
Comprehensive LED indicators display the status of the switch and the network (see the
LED Indicators chapter below).
100BASE-TX Fast Ethernet PoE Ports (Port 1~8):
These ports are Passive PoE enable ports. The PoE port can supply 24V DC 2A power to
the connected PoE device.
For devices that are not compatible with Passive PoE, please turn off the PoE function via
the Web UI, then the PoE port will not offer the power to these devices. This PoE On/Off
feature allows users to freely and safely mix legacy and Passive PoE compatible devices
on their network.
These ports support network speeds of either 10Mbps or 100Mbps, and can operate in half-
and full- duplex transfer modes. These ports also support the automatic MDI/MDIX
crossover detection function, providing true “plug and play” capability. Just plug-in the
network cable to the hub directly.
Reset:
The Reset button is to reset all the setting back to the factory default.
