4. Web Management
AirLive POE-FSH8PW User’s Manual
40
4.26 Security
There are many management functions can be set or performed if you click the
Security on Home Page, including:
MAC Address Binding
TCP/UDP Filter
In the following sessions, we will talk in detail about the management functions under the
Security menu.
4.27 MAC Address Binding (QoS Setting)
This function provides a method for the administrator to specify the relationship between
the physical port and the MAC address. Only the packet with specified source MAC
address can be forwarded. By specifying the MAC address to each port, the network
administrator can prevent the unauthorized user from accessing the switch. Each port can
correspond to up to 3 MAC addresses.
To activate the port binding function, you should enter the correct MAC address, select the
port number, and set the port binding to “enable” and then press “update”.
Port No: Displays the port number being assigned the MAC addresses.
MAC Address: Users can assign up to 3 MAC addresses to the port.
Read: Pull down the selection bar to choose a port number and click the read button to
show the MAC addresses bound with the port or modify the MAC addresses.
Select Port: Pull down the selection menu bar to choose a port number to be set.
Binding: Enable or disable the binding function.
Click Update to have the configuration take effect.
Note: Setting the multicast address to these fields is not allowed. A warning message will
show up if you do so.
