[12]
The screen will display the current charging
status, and will stop automatically once this
process is complete sounding and audio
reminder to notify you when this is done. You
can also stop the process manually by pressing
“STOP”.
If possible always monitor the external temperature of the NiMH/NiCd battery with a temperature
sensor (not included in the set) in order to prevent safety issues caused by overcharging and
overheating.
Press “DCHG” to enter the battery discharging
parameter setting interface. Once all of the
correct settings have been entered press
“START” for 2 seconds to start the discharging
process. This will stop automatically when the set
end voltage is reached, or can be manually ended
by pressing the “STOP” button.
This program is used to balance, refresh and
confirm a battery’s performance. To avoid
overheating set a cooling-off period in the “User
Settings” menu after every cycle of charging and
discharging. The cyclic range is 1-4.
8.3. NiMH/NiCd Cyclic Charge/Discharge
Up
8.2. NiMH/NiCd Battery Discharging
Up
End voltage of discharging
Summary of Contents for TS80
Page 1: ......
