[18]
This charger is equipped with various safety monitors to ensure it’s safe and proper use. If there
seems to be an error with the charger and/or battery pack one of the following notifications may
appear on the screen:
REVERSE POLARITY
The polarity is reversed. The anode and cathode in the output port of
the battery is incorrectly connected.
CONNECTION BREAK
The connection between the battery and the output port is broken, or
the charging lead is not properly connected when attempting to
charge/discharge.
OUTPUT SHORT CIRCUIT
The output port has short-circuited. Please check the charging cables.
INPUT VOLTAGE ERROR
The input voltage has been set incorrectly. Please make sure that the
input voltage is not higher than the limit.
BATTERY LOW VOLTAGE
The detected battery voltage is too low compared to the battery
setting voltage. Please check the cell count of the battery has been set
correctly.
BATTERY HIGH VOLTAGE
The detected battery voltage is too high compared to the batter
setting voltage. Please check the cell count of the battery has been set
correctly.
CELL LOW VOLTAGE
The cell voltage of at least one cell in the pack is too low. Please check
the voltage of each individual cell.
CELL HIGH VOLTAGE
The cell voltage of at least one cell in the pack is too high. Please
check the voltage of each individual cell.
CELL CONNECT ERROR
The connection between the Battery and the charger is faulty. Please
check that all connections have been done correctly.
CHARGER OVERHEATING
The internal temperature of the charger is too high. The internal heat
of the battery should now be decreasing.
OVER POWER
The digital power supply caused the power to exceed the set limit.
MAX CURRENT
The digital power supply caused the current to exceed the set limit.
We warrant this product for a period of one year (12 months) from the date of purchase. The
guarantee applies only to material or operational malfunctions. During that period, we will try to
replace or repair the unit without any service fee. Receipt or proof of purchase is required. This
warranty does not cover damaged due to wear, overloading, improper handling, the use of
incorrect accessories or failure to follow the supplied warnings and safety instructions.
13. Warranty and Service
Up
12. Warnings and Error Messages
Up
Summary of Contents for TS80
Page 1: ......
