[15]
Once all of the correct parameters have been
set, press “START” for 2 seconds to begin the
charging process.
The system should automatically detect the
battery connection when charging begins, but if
an error message reading “CONNECTION BREAK”
appears on the screen, check to make sure that
the battery has been correctly connected to the
charger.
The screen will display the current charging
status, and will stop automatically once this
process is complete sounding and audio
reminder to notify you when this is done. You
can also stop the process manually by pressing
“STOP”.
Select the Pb battery program and press “DCHG”
to enter the Pb battery discharge parameter
settings menu.
Once all of the correct settings have been
entered press “START” for 2 seconds to start the
discharging process. This will stop automatically
when the set end voltage is reached, or can be
manually ended by pressing the “STOP” button.
9.2. Pb Battery Discharging
Up
Summary of Contents for TS80
Page 1: ......
