13
Unibox T RTL Betrieb
102273380-V01.06.2019
7.3 Funktionsheizen
Gehen Sie beim Funktionsheizen wie folgt vor:
1. Öffnen Sie das Ventil vollständig durch ca.
1 Umdrehung der weißen Bauschutzkappe
und stellen Sie das schwarze Handrad auf
den max. Einstellwert.
Regeln Sie die Vorlauftempera-
tur nun über die Steuerung des
Wärme erzeugers.
2. Beginnen Sie mit einer Vorlauftemperatur
zwischen 20°C bis 25°C über mindestens
3 Tage.
3. Heizen Sie anschließend mit max. Ausle-
gungstemperatur über mindestens 4 Tage.
7.4 Abdeckplatte mit Thermostat
mit Fernverstellung
1. Entfernen Sie nach Abschluss der Bau-
arbeiten die Bauabdeckung der „Unibox
T RTL“.
2. Entfernen Sie die Bauschutzkappe.
3. Schrauben Sie den Stellkolben (siehe Abb.
2 auf Seite 7 (8)) auf das Ventil. Führen
Sie das Kapillarrohr nach unten.
Das Kapillarrohr darf nicht geknickt
werden.
Zur Montagehilfe können Sie die
Abdeckplatte mit dem Kunst-
stoffband am Entlüftungsventil
aufhängen.
4. Setzen Sie die Ventilisolierung (siehe Abb.
2 auf Seite 7(9)) auf die „Unibox T RTL“
auf.
5. Setzten Sie die Abdeckplatte auf die „Uni-
box T RTL“.
Abb. 11: Abdeckplatte mit Handrad aufset-
zen
8. Betrieb
Die Mediumtemperatur des Flächentemperie-
rungskreises stellen Sie am Handrad im Innern
der „Unibox T RTL“ ein (siehe 3.4.1 auf Seite
8). Die Raumtemperatur stellen Sie am
Thermostat mit Fernverstellung ein.