B-320-2-E
19
6.4 Switch Functions
6.4.1 Selecting Add and Subtract Counter
SW-1 in the register internal assembly selects the add or subtract counter.
SW-1 is located at the bottom of the register internal assembly. Set switch SW1-1 to either ADD or SUB.
SW1-2 is a switch for the setup mode. See paragraph 6.4.2.
Table 6.2
Switch
Description
SW1−1
ON
SUB (subtracting) counter (standard)
OFF
ADD (adding) counter
Fig. 6.7 shows the SUB (subtracting) counter mode (standard).
6.4.2 Selecting Setup and RUN Mode
SW-2 in the register internal assembly selects the SETUP mode and RUN mode. Set SW1-2 to either RUN or SET.
Table 6.3
Switch
Description
SW1−2
ON
SETUP mode (SET)
*1
OFF
RUN mode (RUN)
*2
NOTE: *1: Mode to change parameters and cumulative total count.
*2: Normally set in this mode.
Fig. 6.7 shows RUN mode.
Register Internal Assembly
SW1
ON
1 2
SUB
ADD RUN
SET
SW1−1
SW1−2
NOTE: These terminal are unused.
STOP
/ROT.
RESET
/
START
/
▲
▲
INTERNAL PUSHIBUTTONS
Used for inspection, changing
parameters, etc. with the register front
cover removed.
（
）
Fig. 6.7
