Oval EL0137, Instructions Manual

Page: 24 / 38

E-126-3-E
2
10.6 List of parameters
No. Name Description Content of setting (setting range)
1. tOtAL (TOTAL)
1.1 UnIt Total and instantaneous flow rate unit Selected from mL-L-m
3
-g-kg-ton-SL-Sm
3
-NL-Nm
3
1.2 dECS Decimal point position in total Selected from 0-1-2-3
1.3 ACCtOt Accumulated total value Displays the current accumulated total value
2. rATE (RATE)
2.1 RATE Time system unit of instantaneous flow rate Selected from /S-/M-/H-/d-
2.2 dECS
Decimal point position of instantaneous
flow rate
Selected from 0-1-2-3
2.3 A Sampling count 1 to 255
2.4 At Upper limit time of sampling 0.1 to 999.9sec
3. dISPL (DISPLAY)
3.1 UPdAt Update cycle of display Selected from FASt-1sec-3sec-15sec-30sec-OFF
3.2 GrAPH
Selection of instantaneous flow rate bar
chart
Selected from dISAbLE-EnAbLE
3.3 SPAn Full scale flow rate 0000.000 to 9999999
3.4 LIGHt Backlight lighting time 0 to 99sec (0 means OFF)
4. MEtEr (METER)
4.1 UnIt Meter coefficient unit
Selected from g/P-mL/P-L/P-SL/P-SmL/P-NL/P-NmL/
P
4.2 M.FACt Meter coefficient 0.00001 to 99999999
4.3 dECS
Decimal point position of meter
coefficient
Selected from 0-1-2-3-4-5
5. PULSE (This model does not use this parameter. Do not change the factory default settings.)
6. OtHErS (OTHERS)
6.1 MOdEL Converter model For in-house management
6.2 SOFt Software version For in-house management
6.3 SErIAL Serial number For in-house management
6.4 COdE Password 0000 to 9999 (initial value: 0000)
1 to 6 in upper table: large classification
1.1 to 1.3, 2.1 to 2.4 etc. in upper table: small classification