E-126-3-E
13
Fig. 6.1 Usable mounting posture
LCD of display unit should not face vertex direction (directly above,
directly underneath) when mounted
6. MOUNTING POSTURE
When you install this instrument, carry out the operation in the mounting posture shown below.
CAUTION: 1. The electrostatic discharge may cause fatal damage of electronic instrument.
Remove static electricity sufficiently before installing the equipment or opening
the lid.
2. For the external grounding terminal of EL0137 (refer to Fig.7.1), carry out
class D grounding work and connect the shielded wire following Fig.8.2.
NOTE:
・
The display unit in the enclosure can be changed to four directions.
・
The enclosure itself can be installed in any of four directions, i.e. 0°, 90°, 180°, 270°.
Summary of Contents for EL0137
Page 37: ...E 126 3 E 37...
