E
ng
lis
h
Software update
LED chart
6
7
All circular back illuminated buttons provide status
information. The CENTER of each channel button provides
status information about the OUTPUT signal.
Center color
OUTPUT indicators
Center color
OUTPUT indicators
color
status
color
status
blue
Channel
ready
orange
MUTE
OUTPUT
yellow
Limiter
active
orange
blinking
MUTE
INPUT
The RING of each channel button provides status infor-
mation about the INPUT signal.
Ring color
INPUT indicators
color
status
white
blinking
(center blue)
Input signal presence
red
Input signal clipping
Channel fault and Armonía callback are associated with
the following LED signals.
color
status
red blinking
(center and ring)
Channel fault
blinking / all channels
(center and ring)
Unit answering to
Armonía callback
The central button light on when the system is in standby
mode or in case of failure in the power supply unit:
Ring color
CENTRAL button
color
status
white
pulsing
(all LEDs off)
System powered
Standby mode
red
pulsing
(normal operat-
ing)
fan fault detected
(output stage side fan)
Center color
CENTRAL button
color
status
red
blinking
power supply or PSU fan
fault detected
yellow
blinking
power supply
temperature protection active
Outline GTA series amplifier platforms embed a com-
plete digital audio signal management system based on
ARM Cortex A-8 processor and TI C6000 DSP platform.
This impressive on-board computing capacity is driven by a
dedicated software environment.
Sebbene l’aggiornamento viene normalmente eseguito
direttamente da ArmoníaPlus, in caso di necessità è pos-
sibile eseguirlo tramite la procedura descritta sotto.
Prima di tutto, contattare Outline (o il proprio distribu-
tore) per farsi dare il file che avrà il nome
update-
version#
-
model
.bin
(e.g. update-v1.5.0.6-GTA Quattro.bin); in order to update the
software of your GTA series amplifier platform you must store
the software update file into a USB key and follow these steps:
1. Switch the amplifier on and wait for the completion of
the boot sequence.
2. Plug the USB key with the software update file into the
USB port on the front panel of the amplifier.
3. Keep pressed the rightmost pushbutton (Armonía
callback) until the second beep is emitted and the LEDs
start blinking.
4. Wait until the amplifier restarts and all front LEDs turn
solid blue.
◄
TURN TO LOCK
◄
TURN TO LOCK
◄
TUR N TO LOCK
◄
TURN TO LOCK
1=GND 2=IN+ 3=IN
ANALOG IN
1=GND 2=IN+ 3=IN
ANALOG IN
GRAND TOURING AMPLIFIERS
Made in Italy
POWERED BY
MAINS
3PH
1PH
L1
L2
L3
N
N
L
OUT4
CH7-8
OUT3
CH5-6
OUT2
CH3-4
OUT1
CH1-2
POWER
OUTPUTS
1 NEG
1+POS
2
2+POS
NEG
CH 2/4/6/8
CH 1/3/5/7
1
2
3
4
5
6
7
8
7-8
5-6
AES3 IN
3-4
1-2
AES3 IN
GTA
-Otto
outline.it
Otto
GTA
◄
TURN TO LOCK
◄
TURN TO LOCK
◄
TUR N TO LOCK
◄
TURN TO LOCK
1=GND 2=IN+ 3=IN
ANALOG IN
1=GND 2=IN+ 3=IN
ANALOG IN
GRAND TOURING AMPLIFIERS
Made in Italy
POWERED BY
MAINS
3PH
1PH
L1
L2
L3
N
N
L
OUT4
CH7-8
OUT3
CH5-6
OUT2
CH3-4
OUT1
CH1-2
POWER
OUTPUTS
1 NEG
1+POS
2
2+POS
NEG
CH 2/4/6/8
CH 1/3/5/7
1
2
3
4
5
6
7
8
7-8
5-6
AES3 IN
3-4
1-2
AES3 IN
GTA
-Otto
outline.it
Otto
GTA
◄
TURN TO LOCK
◄
TURN TO LOCK
◄
TUR N TO LOCK
◄
TURN TO LOCK
1=GND 2=IN+ 3=IN
ANALOG IN
1=GND 2=IN+ 3=IN
ANALOG IN
GRAND TOURING AMPLIFIERS
Made in Italy
POWERED BY
MAINS
3PH
1PH
L1
L2
L3
N
N
L
OUT4
CH7-8
OUT3
CH5-6
OUT2
CH3-4
OUT1
CH1-2
POWER
OUTPUTS
1 NEG
1+POS
2
2+POS
NEG
CH 2/4/6/8
CH 1/3/5/7
1
2
3
4
5
6
7
8
7-8
5-6
AES3 IN
3-4
1-2
AES3 IN
GTA
-Otto
outline.it
Otto
GTA
◄
TURN TO LOCK
◄
TURN TO LOCK
◄
TUR N TO LOCK
◄
TURN TO LOCK
1=GND 2=IN+ 3=IN
ANALOG IN
1=GND 2=IN+ 3=IN
ANALOG IN
GRAND TOURING AMPLIFIERS
Made in Italy
POWERED BY
MAINS
3PH
1PH
L1
L2
L3
N
N
L
OUT4
CH7-8
OUT3
CH5-6
OUT2
CH3-4
OUT1
CH1-2
POWER
OUTPUTS
1 NEG
1+POS
2
2+POS
NEG
CH 2/4/6/8
CH 1/3/5/7
1
2
3
4
5
6
7
8
7-8
5-6
AES3 IN
3-4
1-2
AES3 IN
GTA
-Otto
outline.it
Otto
GTA
Blinking
USB Key in
...
OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
[email protected]
www.outline.it
18
