Outline GTA OTTO User Manual Download Page 16

Page: 16 / 48

lis

3 : 6.Switch on

As soon as you connect the amplifier to the power grid,

the amplifier’s power supply will start supplying power
to the auxiliary systems. The border of the central button
starts blinking white: the amplifier is in standby mode.

The factory default frequency setting on a GTA series

amplifier is 5GHz, but it’s possible to change it to 2.4 GHz via
ArmoníaPlus.

Follow this procedure to activate the Wi-Fi connection

and remotely access your Outline GTA series amplifier
platform.

1. Switch on the amplifier by holding down the central

button on the front panel;

2. Press the leftmost button on the front panel: the button

will light up and the system will establish a new local
Wi-Fi network with SSID as follows:

Outline-

MODELNAME

SERIAL

(e.g. Outline-GTA Otto-71520)

3. Access your mobile device and edit the Wi-Fi configu-

ration;

4. Hang the Wi-Fi network with the right SSID;

A pressure on the central button will wake up the

amplifier.

3 : 7.Switch off

Keep pressed the central button for 3 seconds to switch

the amplifier off. The amplifier platform passes to the stand-
by mode and the border of the central button blinks white.

The amplifier platform turns completely off only when

the mains connector is unplugged.

3 : 8.Mute

A short pressure on the central button toggles MUTE/

UNMUTE to all active channels: any previously muted chan-
nel will remain in mute status.

All other circular buttons (except the central one) toggle

the MUTE/UNMUTE to the specified output channel.

NOTE: Please note that when the amplifier platform is linked
and controlled by ArmoníaPlus™ all MUTE switches are lo-
cally disabled.

3 : 9.Wi-Fi switch

Press the leftmost button: the button will light up and

the system will establish a new local Wi-Fi network with
the SSID as follows:

Outline

-MODELNAME-SERIAL

(e.g.

Outline-GTA Otto-70133) and default password:

0123456789

Press again the leftmost button to switch the Wi-Fi off.

3 : 10.Armon

a callback

In order to identify the unit in the Armonía Workspace,

push on the rightmost button. Otherwise, if you click on Un/
Blink from the contextual menu of the amplifier into the
Armonía Workspace, all the front LEDs of the amplifier will
blink for a while.

5. Insert the following default Wi-Fi encryption password:

0123456789

6. Open the web browser and type the following IP

address in the address bar:

192.168.0.1

7. The system will push the user interface to the browser:

now you can start managing your GTA series amplifier
platform.

8. For simple recall and operation with the interface, we

suggest to bookmark the page on the home screen of
your mobile device; for example, in iOS device click on
the share icon and select “Add to Home Screen” when
the interface has been completely loaded.

9. Remember to switch the local Wi-Fi network off when

monitoring and basic setup are no more necessary:
press the leftmost button in the front panel in order to
switch off the Wi-Fi.

Wi-Fi

◄

TURN TO LOCK

◄

TURN TO LOCK

◄

TUR N TO LOCK

◄

TURN TO LOCK

1=GND 2=IN+ 3=IN