Maintenance - continued
INTERIOR
Fabrics
Interior appointments such as draperies, bedspreads, mattress covers, upholstery and wall pads
are manufactured from high quality materials and should be dry cleaned only. Frequent vacuuming
will keep them free of dust and dirt. Minor spills should be cleaned up quickly to avoid staining. The
affected area should be blotted, not rubbed, to prevent the stain from working deeper into the fabric.
▲
Warning
Do not use lacquer thinner, nail polish remover, carbon tetrachloride, spot remover,
gasoline, or naphtha for any cleaning purpose. These products may cause damage to the
material being cleaned, and may be highly flammable or poisonous.
Solid Surface Top Care (If Equipped)
Solid Surface Top Care ( If Equipped )
General Cleaning
For day to day cleaning, warm soapy water or non-abrasive household cleaners such as
glass cleaner, Fantastikn R, Formula 409R or commercially available solid surface
cleaners will remove most residues. Then rinse and towel dry the surface to prevent
spotting especially in areas with hard water. For a final touch, apply Protect All
Shine PlusTM to your countertop for a clean, dry professional appearance.
Stubborn residue that will not come out with day to day cleaning methods requires a
strongercleaner. The following suggestions will assist you to remove stubborn residue
and refurbish the finish.
Removing Stubborn Residue
Matt:
Apply an abrasive cleaner like Bon-amiR, CometR or AjaxR and a damp sponge, buff in
a circular motion. Then rinse and towel dry.
Satin:
Apply a mild abrasive cleaner such as Soft ScrubR and a damp sponge, rub in a
circular motion. Then rinse and towel dry.
Semi-Gloss:
Apply a soapy water and with a white Scotch-BriteTM pad rub in a circular motion. Then
rinse and towel dry.
Gloss Finish:
This finish is limited to mild detergents or nonabrasive cleaners with a soft cloth.
Removing Minor Cuts and Scratches
WilsonartR Solid Surface is completely renewable since the color goes all the way
through. The following guideline will assist with removing minor cuts and scratches.
Apply an abrasive cleaner like Bon-amiR, CometR or AjaxR and a damp green Scotch-
BriteTM pad, rub in a circular motion in progress steps until achieving a uniform finish.
Matt ( blending ):
With damp sponge and the same abrasive claner, buff in a circular motion. Rinse and
towel dry.
84
Summary of Contents for 2013 Creek Side
Page 1: ......
