Appliances and Equipment - continued
Syncing the Remote to the Receiver-
1. To begin syncing the remote to the receiver, both the receiver and
the remote must have power (12V DC for the receiver and the battery
in the remote must have a charge)
2. Push and hold the black button on the receiver while the black
button is depressed, push and release the "Light" button on the
remote. Note: If close enough to the receiver, an audible "click" can
be heard verifying the receiver is programmed to the remote.
3. Release the black button on the receiver.
Only sync two remote per receiver.
Note:To Sync a second remote to the receiver, repeat Step 2 and 3
Remote Operation Instructions-
1. Turn the remote on by pressing and releasing the large silver button
at the bottom of the unit.
2. Press the "OK" button on the touch screen to access the function
menu. The first page of the function menu has buttons for the security
light and functions 1-3. Functions 4-7 are located on the second page
of the menu and can be accessed by pressing on the "Next button at
the top of the screen. The functions buttons correspond to the same
names as the functions selected during configuration Most screens will
have left and right arrow buttons at the bottom of the screen. The left
button will retract the slide or awning. The right button will extend the slide
or awning. Press and hold either button until the item is fully retracted or
extended. The icon at the top of the screen will animate to show the action
and otherwise, the button will state its action.
3. After the desired operations are complete, the remote can be powered
down by pressing and holding the large silver button of the unit or will
automatically turn itself off after 2 minutes of non-use.
the unit or will automatically turn itself off after 2 minutes of non-use.
Note:
Please read and study the operating manual supplied with your trailer
before operating the Touch Screen Remote.
79
Summary of Contents for 2013 Creek Side
Page 1: ......