Outdoors RV 2013 Creek Side Owner'S Manual Download | Manualshive

Page: 72 / 101

background image

Appliances and Equipment - continued

Range Hood

The range hood operates on 12V power and should be used as a ventilating system when cooking.
Operational switches for the fan and / or light are on the front panel of the range hood.

Care and Maintenance

Care of the range hood is similar to the range.  Use warm soapy water and wipe off any grease
before staining can occur.  Do not use harsh chemical cleaners or abrasives.  Clean the plastic light
lens and filter by removing and washing in hot soapy water.  Frequency of cleaning is dependent
upon range use.

Range / Cook-Top

The range or cook-top installed is a LP gas appliance. Carefully read the manufacturer's manual for
complete operational and safety instructions, provided in the unit packet, prior to using the
appliance.

Operation

Prior to Lighting

Assure the gas supply to the trailer is turned "on".  Open a window and / or vent for ventilation
purposes.  Check for any hazards (flammable liquids, fabrics, objects near burners).  If gas smell is
present, Do Not light.  See "What to do if you smell gas".  Depress knob corresponding to burner to
be lit and turn to "Light" position.

Immediately Light Burner

Match-Light Models: Hold a long match or hand held igniter, near the burner port. Make sure the
hand held igniter is the type designed for open flame burners.
Piezo Ignition Models: Rotate the Piezo knob clockwise rapidly. This will produce a spark to ignite
the gas.

After lighting adjust burner flame to needed level.  If flame on burner goes out after initial lighting or
cooking, turn burner knob to off and wait 5 minutes before attempting to relight.  Before attempting
to relight, check to make sure gas smell has disappeared.  If odor still present after 5 minutes "DO
Not" relight burners.  See "What to do if you smell gas".

To turn burner(s) off: turn the knob to the "OFF" position.

The Range or Cook-top installed is a LP gas appliance. Carefully read the manufacturer's manual for
complete operational and safety instructions, provided in the unit packet, prior to using the
appliance.

70

«
...
70
71
72
73
74
...
»

Summary of Contents for 2013 Creek Side






































































































Reviews:

No comments

Related manuals for 2013 Creek Side

Interstate 2006

Brand: Airstream Pages: 99

Brand: Renegade Pages: 57

Unicorn Seville

Brand: Bailey Pages: 26

Brand: Winnebago Pages: 98

1996 Adventurer

Brand: Winnebago Pages: 110

2004 Ultimate Freedom

Brand: Winnebago Pages: 152

Transporter Danbury

Brand: Volkswagen Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands