Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 12
27
. Position the Front
Top Plates on top of Door
Header and front wall
panel. There are 2 plates
(72” and 19” long). Front
top plates are straight cut
on the ends. Once again,
the plate will be flush with
inside of top wall framing.
Attach with 6 - 2” screws
in each plate. (4 screws
in long and 2 in short
plate).
26.
Next, attach the 6 Side Top Plates (3 per side). The
side top plates are angle cut down the edge. Once again,
position top plate on wall plate so it is flush with inside of
wall plate. Side plate should also be flush with rear wall
plate. Use 45 1/2” long plate for the middle section. Secure
with 4 - 2” screws per piece.
28.
Complete all side
top plate attachments as
described above.
Flush
Caution:
Prior to completing
Step 30
, side top plates
will be protruding out from
the shed, please use
caution in the work area.
