Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 7
Lay out all the wall panels and become familiar with their location. On Standard Kits, there are
4 Window
Wall Panels, 5 Solid Wall Panels,
1
Narrow Wall Panel
and
Dutch Door
(top and bottom
sections). Make sure to position panels right side up so water is directed away from and not into shed.
Look at window wall panels to determine proper wall position to confirm.
Dutch
Door
15.
Locate
Window Inserts
. Place Window Insert into wall opening tight to wall siding. On the
inside, shim Window Insert evenly in cavity. Kits include one additional shingle for shimming of the
window. When properly positioned, secure Window Insert to wall framing cavity with 4 - 2” screws.
Wall Plate
14.
Starting with All
Solid Wall Panels
, carefully lay panel face down. Position and attach
Bottom
Wall Plates
to bottom of wall studs of each wall panel with 3 - 2 1/2” screws. Position so Wall Plates
are flush with framing.
Note,
You may prefer to
install Windows in
the Miscellaneous
Section at the end
of assembly.
