39.
Position the
Rear Gable Wall
on top of the
Rear Top Plate.
The rear gable framing should sit flush with the
inside of the top plate. It should also be centered
sideways on the top plate.
Hint:
use a square to check the angle of the gable
framing and top plate. Both angles should line up.
Adjust gable accordingly. Temporarily attach to
walls and Top Plate with 2 - 2” screws. Gables
may need slight adjustment in
Step 53.
Complete
attachment in
Step 53
and additional 6 - 2”
screws. Screw from the bottom of gable framing
down into Top Plate and Wall.
41.
Position the
Middle Gable Wall
on top of
front top plate. Middle gable has cedar siding on
the front that is cut flush with gable framing. Once
again, the framing of the gable should be flush with
outside of plate and be centered sideways on the
plate.
When in correct position, attach with
2 -2” temporary screws as per
Step 39.
Later in
Step 53,
complete
attachment after Gables are correctly
aligned with 6 more 2” screws.
40.
Locate both Middle Gable Walls and attach together as per
Step 35.
Siding is
flush with
framing
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 16
Gable Notch
