68.
Slide in another Filler Shingle
and attach as per
Step 67.
On your
last row of shingles, the filler shingle is
precut to fit properly. Attach to roof
with 2 finishing nails per shingle.
71
. Position Porch Veneer best face exposed so flush with front Rafter and Ridge Board. When
correctly in place, nail veneer to rafters with 12 finishing nails. Complete both sides.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 26
4- 90 degree Simpson
Ties / Gable.
69.
Position 2 Simpson Strong ties on battens and
outside rafters and secure 4 - 1 1/4” screws. 8 ties in
total.
70.
To further secure roof panels, from the inside, drill pilot holes in each Mid Rafters (3 per Rafter) on
an angle. Using 3 - 2 1/2” screws, secure rafters to roof battens.
Note,
from outside, push roof panel
down so batten sit flush against rafter when securing. In Porch area, angle screw both the mid and
outside rafters.
Mid
Raf
ter
Roof Batten
3 - 2 1/2” screws Toe
Nailed in each Mid Rafter
