Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 23
61.
Next, time to install
Filler Shingles
to
hide roof seams of shed. Starting at bottom on
Short Roof Side, push a Long Filler Shingle
underneath shingles directly above it until end
is flush with bottom shingles.
62.
Screw first filler shingle down to
rafters using 1 - 2 1/2” screw per panel (2 in
total). Make sure to screw into both rafter.
63.
Slide in the next Long Filler shingle and
attach as per
Step 62.
At the top, use smaller
shingles to fit. Attach final shingle to roof with 2
nails per shingle. Complete Long Roof Side
next. There are 2 - Long shingles and 1 Short
shingle per roof seam.
exposure
line
exposure
line
64.
Position 2 Simpson Strong ties on battens
and outside rafters and secure 4 - 1 1/4” screws.
4 ties per side (8 ties in total).
4- 90 degree Simpson
Ties / Gable.
65.
To further secure roof panels, from the inside, drill pilot holes in each Mid Rafters (2 per Rafter) on
an angle. Using 2 - 2 1/2” screws, secure rafters to roof battens.
Note,
from outside, push roof panel
down so batten sit flush against rafter when securing.
Mid
Raf
ter
Roof Batten
2 - 2 1/2” screws Toe
Nailed in each Mid Rafter
