Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 24
70.
Complete securing remaining Lexan Panels.
1 1/4” Nail
equal
gaps on
each
side of
rafter.
67.
From the inside, carefully slide end of
panel underneath shingles. After completion of
Step 68
, use 3 - finishing nails to secure Lexan
Panel to underside of roof batten.
71.
With a Caulking Gun, apply Silicon to seal
gaps between rafters and Lexan Panels. Apply
Silicon
down each side of rafter. Use liberal
amounts to properly seal the joint.
66.
Installation of 6
Lexan Panels
is next. Start by
removing protective plastic layer on each panel.
Slide panel up between rafters so it rests on Lexan
Support Cleats.
68.
Position Lexan Panel with equal gaps between rafters
and overhanging end of rafters by 1”. With 3 - 1 1/4” nails,
secure panel to Lexan Support Cleats.
69.
Position and secure 2nd Lexan
Panel as per
Steps 66-68.
Caulking
