Do Not Attach Walls To
Floor until Step 29.
16.
Position rear solid wall into
place on plywood floor. Butt both
vertical wall studs of side and rear
walls together and attach with
3 - 2 1/2” screws. Screw at the
bottom, middle and top of stud to
secure properly.
Rear
Solid
W
all
Side
Solid
W
all
17.
With the corner wall attachment complete, position the
rear Window Wall panel in place so bottom 2x3 wall
framing is sitting flush with outside floor joists and
plywood floor. Wall siding should overhang floor by
approximately 1/2”
When positioned correctly, attach both rear wall panel studs
together as per
Step 16
.
Rear
Solid
W
all
2x3 wall framing flush
with outside of plywood.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 8
18.
Locate
Window Insert
for Rear Wall. Place Window Insert into wall opening tight to wall siding.
On the inside, shim Window Insert evenly in cavity. Kits include one additional shingle for shimming of
the window. When properly positioned, secure Window Insert to wall framing cavity with 4 - 2” screws.
Optional
- Caulking
seams will help prevent
moisture from entering at
seam.
Caulking not included in
kit.
