59.
Attach
Corner Trim
Filler Strips
(4 - 1/2” x 2
1/2” x 75”) to front and rear
walls in each corner.
Hammer with 8 - 1 1/4”
finishing nails. Strips are
positioned flush with siding
and bottom skirting.
bottom
skirting
58.
Attach
Bottom Skirting
around the base of the shed.
Skirting will hide floor framing.
The front & rear skirting pieces
will meet together in the center.
Gaps on outside will be
covered by Wide Trim pieces
later. Start with side skirting and
attach with 4 - 1 1/4” finishing
nails per piece. Attach additional
1 1/4” screws on bottom edge of
wall siding into bottom wall plate
to further secure bottom siding to
framing. Drill pilot holes in sid-
ing to prevent splitting.
3 pieces of Bottom Skirting for sides /
2 pieces for front and rear.
side
skirting
Gap in corner
rear
of shed
60.
Attach
Side Wide
Corner Trim
(4 - 1/2” x 4 1/2” x 82”)
over filler trim. Use
8 - 1 1/4” finishing nails per
piece. Once again, trim
should be flush at bottom of
bottom skirting. Trim should
also overhang sidewall wall
siding by 1/2”.
Bottom Skirting
1/2” overhang
1/4” screw
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 24
