45.
Roof Gussets
are positioned on middle rafters. Prior to attaching
,
make sure Side Walls are
properly aligned. Have two helpers push the front and rear walls at the top from the outside of shed until
inside to inside measurement between Side Wall Plates is
91”.
When correct, slide gusset up, use level
to square gusset and attach to rafters with 4 - 2” screws. Complete remaining Gussets.
91” across
47.
Identify Roof Panels. There are 2 Outside and 1 Middle Roof Panel per side.
Starting with outside rear panel, lift up and place on rafters.
Shingles overhang battens
on outside panels.
Shingles and battens
flush on middle panel.
Roof facing
down with
roofing felt
showing.
Outside Roof Panel.
46.
Attach
Simpson Strong Ties (22 deg. bend)
to Top Wall framing and plates and also to the
underside of the rafters. Use 4 - 1 1/4” screws to secure. There are 7 Ties per side.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 20