Ouring 3D TALK DS200, User Manual

Page: 50 / 54

Jiangsu Ouring 3D Technology co.,Ltd
50
use.
Before using
1. To ensure the normal power supply
before the printer starts to use, please
confirm whether the connected power
output is stable.
Source instability can damage printer.
2. The printer is placed on a horizontal
plane. Before use, please place the
printer on a stable horizontal table due
to the resin.
Printing material is liquid, If printer is tilt,
it will cause resin material spill, then
model printing failure
3. Material storage
Remove material packaging only when
needed, store materials in a dry and
ventilated environment, away from fire
If the printer is not used for a long time,
please pour the resin material into the
professional packaging bottle, then keep
it inside closed.
In the use
1. After printing, there is no model or incomplete model detection and processing
method on the printing build plate. If the leveling gap is too large and the model is
not bonded to the printing build plate and is directly cured to the material vat, then
it needs to be leveled again. Check whether there is cured resin in the liquid resin in