Ouring 3D TALK DS200 User Manual Download Page 3

Page: 3 / 54

Jiangsu Ouring 3D Technology co.,Ltd

1. Product Description

General

3DTALK-DS200 series printer is a high-tech digital 3D resin printer developed and

produced by Jiangsu Ouring 3D Technology Co., Ltd. (referred to as Ouring). Users of

3DTALK-DS200 are advised to read the product manual carefully before start. Ouring

reserves all rights. This manual is subject to upgrade without prior notice.

Precautions

Note: Do not allow children to operate the printer without adult supervision to avoid

injury.

Note: The printer should be placed on a horizontal table to avoid falling or causing

the resin flowing out from the vat.

Note: Do not place the printer in a damp or dusty environment, such as a bathroom

or transportation area.

Note: Please place and use the printer in a well ventilated environment. A small

amount of non-toxic odor will be produced during printing. Having a well-ventilated

area will ensure a more comfortable environment.

Note: Please lower the cabin door during printing. Do not use a metal blade to clean

the resin vat.

Note: To ensure the maximum print quality, please use original resin.

Summary of Contents for 3D TALK DS200























































Search results

Summary of Contents for 3D TALK DS200

Reviews:

Related manuals for 3D TALK DS200

Brands by name

Popular brands

Ouring 3D TALK DS200, User Manual

Search results

Summary of Contents for 3D TALK DS200

Reviews:

Related manuals for 3D TALK DS200

Brands by name

Popular brands