Jiangsu Ouring 3D Technology co.,Ltd
12
3.Printer Preparation
Printer installation
1.Take out the fixed strip and protective cotton of the printer from the packing box
and place the printer on the horizontal tabletop.
2.Open the printer compartment door and take out all the protection devices and
random accessories from the printer
3. Remove the protective film on the display screen
4. Wipe the new resin vat inside and outside with the wet wipes and dry it naturally.
Then mark the following figure and place the vat correctly in the printer
compartment (see the picture below).
5. Rotate the four positioning screws downwards to fix the vat to ensure that the vat
does not shake (see the picture below).
Summary of Contents for 3D TALK DS200
Page 1: ...Jiangsu Ouring 3D Technology co Ltd 1 User Guide of 3D TALK DS200 Version V3 0 ...
Page 21: ...Jiangsu Ouring 3D Technology co Ltd 21 2 choose the software storage path Everyone Next ...
Page 22: ...Jiangsu Ouring 3D Technology co Ltd 22 3 Click Next button ...
Page 40: ...Jiangsu Ouring 3D Technology co Ltd 40 The figuration file sets the content ...