Ouring 3D TALK DS200, User Manual

Page: 8 / 54

Jiangsu Ouring 3D Technology co.,Ltd
8
Resin Professional Dental model resin, Dental Ortho Resin, Dental
Guide resin
Transfer
Power input
Environmental Requirements

Avoid placing the resin in the following environment: high temperature
environment, local heat source, oxidizing environment, freezing environment,
direct sunlight, ultraviolet radiation, inert gas coverage, dust environment.

The stability of print quality is affected by the heat and humidity, so please
ensure the proper operating conditions. (Temperature 18 - 28 ° C / humidity 40 -
80% RH)

Please place the printer in a clean office environment that meets the above
conditions.

In view of the size of the printer, please prepare a table top with a width of
≥500mm2 and a height of about 600mm.

One computer.
（
system version-Windows7 or above
）
CPU - lnter i3 above
RAM - 4GB above
Graphics card – Nvdia series
，
1G and above
，
supporting OpenGL4.1
）

Model cleaning alcohol (90% ~ 95%), alcohol vat, ultrasonic cleaner (optional),
UV curing box (optional) etc
Touch Screen Introduction
Boot Interface

In the [File] tab, select the print file stored in the printer and the inserted USB
disk of the printer for printing.
AC1
1
0/2
4
0V 50/60Hz 400W
US
B
drive, wifi