Ouring 3D TALK DS200, User Manual, Page: 18 / 54

Jiangsu Ouring 3D Technology co.,Ltd
18
10. Click once the arrow
▲
above the [Reset] button, and then click the [Reset]
button to raise the build plate to the top of the printer, and finish the leveling.
Filling resin material
1. Shake the material inside the bottle before pouring it into the resin vat
，
to keep
the density of resin uniform
2. Make sure there is no obvious solid impurity in the vat before pouring the resin
material.
3. Wear the protective gloves, goggles, and mask, then pour the resin material into
the vat; (the amount of resin material should be poured according to the level mark
of the vat)