DH
Energy
DH
Supply
102.30°C/
DH
Return
41.50°C/
DH
Energy
18500kWh/
DH
Water
3550m3/
Id1712240521
DH Energy
DH Supply 102.30°C/
DH Return 41.50°C/
DH Energy 18500kWh/
DH Water 3550m3/
ID171226240521
OUMAN EH-203
ENERGY METER
OUMAN EH-203
Report
Report day
Report tel.no1
Report tel.no2
0
Energy meter
Not connected
Connected
Press the
button to move the cursor to
"Change”. Press
. "O” blinks.
Write the telephone number using the text editor.
You can move forward or backward in the character
OK
row with the
or button. Confirm the number by
pressing
, then the same number that you
selected will blink in the next space. Whichever
has been selected last can be deleted by pressing
. If you press the
button for a while, the
number will be deleted and the number that was
previously fed will remain in effect. When you are
ready, press
for a while (over 2 secretary).
-
+
OK
ESC
ESC
OK
Telephone nr.
Change
34
A report is not sent when the set value is 0.
Otherwise the report is sent on a set day. If there
are fewer days in the month than the set reporting
day, the report is sent on the last day of that month.
Directions for entering the
maintenance mode are on page 21.
Special mainten.
Rstore settings
Settings
Meas. 6 setting
Dig1 selection
Dig2 selection
Dig3 selection
Enrgy meter
LON initaliz
Curve type
Regul.Circ.Name
Taking automatic reporting into use:
OK
Press the button to move cursor to “Connected”. Press
.
Installation of EMR-200, Energy meter read head to the energy meter:
- Attach the magnetic surface of the EMR-200 to the energy meter
so that the connecting cord goes down.
- The Kamstrup Multical energy meter has control knobs for
positioning the EMR-200. Install the EMR-200 energy meter so that
it touches the knobs on the bottom and side.
- The EVL energy meters has a metal ring for attaching and
positioning the EMR-200.
- The EMR-200 has a 10 m connection cord- A 10 m extension cord
(CE-EMR10) can be used if necessary
Press the
button to move the cursor to
.
Press
"Energy meter"”
OK
.
Take into use:
1. District heating energy consumption reading from an energy meter
(see p. 11).
2. Automatic reporting from an energy meter by text message. If using
automatic reporting, set the day when the report is to be sent and the GSM
numbers that the report is sent to. The controller automatically sends a
monthly consumption report by text message from the energy meter to two
selected GSM numbers.
Write the GSM number that the controller sends the
report to from the energy meter as a text message.
the number is given with the text editor as follows:
