Otto Bock DynamicArm Plus, Instructions For Use Manual

Page: 58 / 72

Extension Flexion
Strong signal that begins quickly.
After exceeding the ON threshold, the upper switching
threshold must be reached within 80 ms. The level of
the ON threshold and the upper switching threshold
can be changed manually. Signal that begins slowly.
The ON threshold is exceeded, but remains below the
upper switching threshold for 80 ms. The level of the
ON threshold and the upper switching threshold can be
changed manually.
Prog Activation Control Version Switching mode
3 With two electrodes The speed is proportional to
the control signal. Channel 5 or 6
(green or brown
marking)
• Flexion: triggering with
channel 5 (green marking)
• Extension: triggering with
channel 6 (brown mark­
ing)
Prog Activation Control Version Switching mode
4 Acceleration with two
electrodes The longer the control signal
is held, the more the product
accelerates. Channel 5 or 6
(green or brown
marking)
• Flexion: electrode 1,
channel 5 (green marking)
The product accelerates
slowly up to the maximum
speed, weak myosignal
above
ON switching
threshold
• Extension: electrode 2,
channel 6 (brown mark­
ing)
The product accelerates
quickly up to the maximum
speed, strong myosignal
above
ON switching
threshold
Prog Activation Control Version Switching mode
5 Acceleration with a
switch Switch position 0: no control
Switch position 1: extension
Switch position 2: flexion Channel 5 or 6
(green or brown
marking)
• Flexion: channel 5 (green
marking)
The product accelerates
slowly up to the maximum
speed, weak switch signal
58
Handling
DynamicArm Plus 12K110N=*