The lamination ring with quick-disconnect wrist unit has to be glued in after the forearm has been cut to length.
Before starting to glue it in, please read these instructions very carefully and proceed exactly in the order
described.
INFORMATION
Read the relevant material safety data sheets before processing the 636K18 Orthocryl sealing resin compact
adhesive and the 617H14 hardener paste.
1) Determine the height of the lamination ring.
2) Mark this measurement on the inside of the fore
arm.
3) Mix 636K18=1 Orthocryl sealing resin compact
adhesive and 2% 617H14 hardener paste.
4) Cover the outside of the forearm with 627B4 poly
ethylene adhesive tape to avoid soiling it while glu
ing.
5) Using a paintbrush, apply the resin in a wedge
shape to the marked area of the inside forearm and
the outside of the lamination ring.
6) Insert the lamination ring and lamination ring cover.
The lamination ring must be flush with the socket!
Let the adhesive joint harden.
INFORMATION: Measure the forearm length.
45
DynamicArm Plus 12K110N=*
Preparing the product for use
Summary of Contents for DynamicArm Plus
Page 71: ...71 DynamicArm Plus 12K110N...
