OTT SE 200, Operating Instructions Manual

Page: 4 / 28

1 Scope of supply
䊳
OTT SE 200 – 1 Shaft encoder with permanently attached connecting cable (10 m, 15 m or 30
m); SDI-12 or SDI-12/4 … 20 mA interface; float pulley for
float cable with 1 mm diameter or for the bead chain
– 1 set of installation accessories
– 1 operating instructions
– 1 Factory acceptance test certificate (FAT)
2 Order numbers
䊳
OTT SE 200 Shaft encoder 63.060.001.9.2
depending on desired design:
– SDI-12 or SDI-12/4 … 20 mA interface
– rotational direction to the left or to the right
– measuring range for designs with 4 … 20 mA interface
1 m, 10 m or 30 m / 3 ft, 30 ft or 90 ft
– float pulley for float cable or bead chain
– length of connecting cable 10 m, 15 m or 30 m
䊳
Accessories Float 27.001.071.3.5
– 80 mm Ø
Counterweight 27.050.013.4.2
– 0.100 kg
Float cable
– 1 mm Ø; Nirosta
– Crimp sleeves
– Length:
10 m 27.150.040.9.2
30 m 27.150.041.9.2
50 m 27.150.042.9.2
100 m 27.150.043.9.2
Bead chain with installation accessories
– Length:
10 m 27.152.010.9.2
30 m 27.152.030.9.2
50 m 27.152.050.9.2
100 m 27.152.100.9.2
Observation well installation 55.430.050.3.2
set for 4"; 4,5"; 5" + 6"
4