OTC DAIHEN EUROPE DTX 2500, Manual

Page: 43 / 58

Operation system
GB
40
DTX 2500 TIG
DTX 2500 TIG
Chosen
frequency Hz
% Display
DC
0,3 12,5% 0,31
0,3 25,0% 0,32
0,3 50,0% 0,33
0,3 75,0% 0,34
0,5 12,5% 0,51
0,5 25,0% 0,52
0,5 50,0% 0,53
0,5 75,0% 0,54
1 12,5% 1,1
1 25,0% 1,2
1 50,0% 1,3
1 75,0% 1,4
3 25,0% 3,1
3 50,0% 3,2
3 75,0% 3,3
5 25,0% 5,1
5 50,0% 5,2
5 75,0% 5,3
10 25,0% 10,1
10 50,0% 10,2
10 75,0% 10,3
15 25,0% 15,1
15 50,0% 15,2
15 75,0% 15,3
20 25,0% 20,1
20 50,0% 20,2
20 75,0% 20,3
30 25,0% 31
30 50,0% 32
30 75,0% 33
50 25,0% 51
50 50,0% 52
50 75,0% 53
80 25,0% 81
80 50,0% 82
80 75,0% 83
100 25,0% 101
100 50,0% 102
100 75,0% 103

Setting the main current:
You can adjust a value from 5 A to the maximum welding current of the power source.

Setting the slope-down time (Slope-Down):
You can choose a value between 0 and 20 seconds. This value can be adjusted
individual for each welding program (except during the electrode welding).

Setting the final current:
You can adjust a value from 5 A to the maximum welding current of the power source.

Setting the gas post-flow:
You can choose a value between 0 and 20 seconds.