17
5. Lead the unattached end of the
Bowden cable into the nozzle
shoe inside the clean water tank.
Now secure the cable by gently
pushing and turning it clockwise,
and close the cover.
6. Place the tank between the
handle tubes and fix it to the
tank holder by turning the
retaining collars down.
Important: FIRMLY tighten the
4 screws with the washers.
If the tank is not sitting
correctly, it will leak.
7. Finally:
Connect the power cable.
Remove the dirt tray. On the right
of the casing, there are 2 small
screws. Loosen these screws and
then the power cable can be
plugged firmly into the machine.
Gently tighten the screws.
The machine is now ready to be used.
4. Working with Osmo Decking & Flooring Cleaning Machine
Switching on and off
Switching on
> Gently press the safety release
pedal with your foot (1) and slowly
pull the handle towards you (2).
The motor starts and the brushes
slowly begin to turn.
Switching off
> Put the shaft back into the basic
position (without pressing the pedal).
