18
Easy transport from A to B
To move the machine around, push
the red button (located on the right)
into the lower position. The transport
wheels will stay in place while the
handle is lowered. The machine can
now be transported.
As long as the red button is in the
lower position, the motor must not
be switched on!
Never leave the machine resting
on the roller brushes with the
handle lowered.
5. Work position
Press the red button up and lower the handle into the work position.
The transport wheels move up and the machine can be operated.
6. Setting brush pressure
With the black button (pressure regulator) on the left of the machine, one of four
brush pressure settings can be chosen. In outdoor areas, a higher pressure setting
is more useful. Minimum pressure is reached with the lowest setting; maximum
pressure with the highest setting. If the motor does not start, set the pressure
regulator one level down.
Attention:
When using the machine for the first time, loose bristles may come out of the brush
body. Switch off and unplug the machine. Remove the bristles from the drum and
then restart the machine.
Note:
Only use the universal (white) brush in indoor areas!
The abrasive (hard bristle) brush is recommended for outdoor areas.
