20
Recommended work method
1. Start the machine by pressing the safety
release pedal and slowing pulling the
handle towards yourself.
2. Push the machine forward and apply
cleaning product by pulling the white
liquid lever. Depending on the amount
of dirt and stains as well as the flooring
conditions, use cleaning products sparingly.
3. Stop the liquid supply approx. 30 cm
(12 inches) before reaching the
wall or a turning point and
continue towards the wall.
4. Drag the machine back along
the same path. In reverse,
wastewater is picked up. To
give Osmo Wood Reviver a
longer reaction time and to
achieve better results in outdoor
areas, only loosely fit the
wastewater tank into place.
Click the wastewater tank back
into the machine to scrap dirt
from the drum again. Stop
the water supply while removing
dirt. When you have arrived back
at the starting point, push the
machine to the next track,
already cleaned track should
be overlapped (Graphic 1).
In large rooms, flooring can
be cleaned in the separate
laps (Graphic 2).
5. If the wastewater tank is full, lift
the cover and gently remove the
tank from the machine. Always
keep the scraper clean. When
reinserting ensure that there is no
dirt between the revolving drum
and the scraper.
6.
Do not touch the scraper without
gloves – risk of injury.
Graphic 1
Graphic 2
